PDB Matek HUBOSD ECO "H TYPE"

MATEK


Type: PDB


MATEK PDB HUBOSD ECO "H TYPE" STOSD8, CURRENT MODULE & DUAL BEC

HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB.
It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad.
The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.

Link List:

Specifications:

  • Input: 8~ 21V (3-5S LiPo)
  • PDB: 4x30A (Max.4x35A)
  • Regulated 5V and 12V outputs
  • Current Sensor 140A
  • Built-in STOSD8
  • 2oz copper, 4-layers &1.6mm PCB.
  • 1x Battery input, 4x ESC outputs.
  • 2x BEC 5V outputs, 2x BEC 12V outputs.
  • Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
  • 1x Serial port (RX, TX, G)
  • Dimensions: 46x36x4mm, Weight: 8.5g
  • Mounting holes 30.5mm square spacing,Φ3mm

PDB (ESC outputs)
Continuous current: 30A per output Peak current (10 seconds/minute): 35A per output.

BEC 5V outputs
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)

BEC 12V outputs
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4~5S operation)
Continuous current: 500mA@16V IN, 400mA@20V IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

SKU: HUBOSD8-H


Related Items